This report lists ready-to-run and kit automobiles, trucks, motorcycles, bicycles, and boats. Basically, anything that transports people (except for trains). This also covers detailing parts for these items. Click photos to visit the web sites.
New to this web site, BRRRRT is a company that produces R/C vehicles in various scales, but mostly in 1:64 scale. The headquarters is in mainland China where they are a wholesaler, but their U.S. office is in Greensboro, North Carolina, and that is from where the models ship. The models have full-proportional throttle (scale speed) and steering, gyro-assisted control, two tire setups, working LED lights (except for some construction vehicles; some come with sound), and precise 2.4GHz radio control in true 1:64 scale. The two auto-transport trucks have a detachable semi-trailer. Internal batteries, 3.7V 150mAh Li-ion, can be charged with a type-C cable (included) on a 5-volt source, and takes about 2 hours. The models have about a 30- to 40-minute runtime. The controllers use AA or AAA batteries (not included). The company carries spare parts and replacement controllers. Add some animation to your home layout or your club display.










3000toys.com announces these models. Note that these are highly-detailed models. They feature an opening hood with authentic engine detail, accurately-detailed cab interior, poseable front wheels, pivoting fifth-wheel for trailer attachment, rolling wheels, working suspension, working landing gear, and a detailed chassis and undercarriage.






3000toys.com announces these models. Note that these are highly-detailed models. They feature an opening hood with authentic engine detail, accurately-detailed cab interior, poseable front wheels, pivoting fifth-wheel for trailer attachment, rolling wheels, working suspension, working landing gear, and a detailed chassis and undercarriage.




These go by various names, Yard Goat, Yard Spotter Truck, Trailer Jockey, Donkey, Switcher, Yard Mule, Yard Dog, Yard Hostler, UTR (Utility Tractor Rig), etc. They move intermodal containers around in a loading yard, a cargo yard, or large warehouse facilities. This is a 3D-printed, unpainted kit that consists of the cab, the frame, and the wheels. This allows for separate painting before assembly. The photos are likely of the company's HO-scale model.


While Hot Wheels by Mattel produces a lot of vehicles that might be close to S-scale in size, they always have to be evaluated on a case-by-case basis if you are meticulous about true-to-scale dimensions.
However, apparently since November 2025, Hot Wheels has been producing "Museum of Modern Art" models. According to Hemmings Motor News, "...Hot Wheels has announced a global, multi-year partnership with the Museum of Modern Art (MoMA). The collaboration, initiated by Mattel Creations, will produce a series of collectible, art-inspired products that celebrate groundbreaking design." These appear to be highly accurate models, all in 1:64. So far, there have been three releases. Follow the links below for more photos and details.



3000toys.com announces these models. Note that these are highly-detailed models. They feature an opening hood with authentic engine detail, accurately-detailed cab interior, poseable front wheels, pivoting fifth-wheel for trailer attachment, rolling wheels, working suspension, working landing gear, and a detailed chassis and undercarriage.






Hexagon is a manufacturer listed on the 3D Central Trains 3D-printing service company's web site. They have been producing items for HO-scale. They have recently released, in S-scale, two different types of shipping container chassis, and an add-on component used by refrigerated shipping containers. Note that the container chassis can be ordered with your choice of wheels. These are unpainted, 3D-printed items. The "S-scale" version is linked to, below (select the wheel choice by clicking to the desired one before adding the item to the shopping cart).




3000toys.com announces these models. Note that these are highly-detailed models. They feature an opening hood with authentic engine detail, accurately-detailed cab interior, poseable front wheels, pivoting fifth-wheel for trailer attachment, rolling wheels, working suspension, working landing gear, and a detailed chassis and undercarriage.









3000toys.com announces these models. Note that these are highly-detailed models. They feature an opening hood with authentic engine detail, accurately-detailed cab interior, poseable front wheels, pivoting fifth-wheel for trailer attachment, rolling wheels, working suspension, working landing gear, and a detailed chassis and undercarriage.



3000toys.com announces these models. Note that these are highly-detailed models. They feature an opening hood with authentic engine detail, accurately-detailed cab interior, poseable front wheels, pivoting fifth-wheel for trailer attachment, rolling wheels, working suspension, working landing gear, and a detailed chassis and undercarriage.


The company has released their S-scale version of the pipe-laying, derail-rescue Caterpillar bulldozer. It comes with several add-ons. Also available are two trailers. One is used by commercial roofers when they need to transport hot tar to the job site. The second trailer is a portable wood chipper. They also have two traffic barriers available. All are 3D-printed and arrive unpainted, and some assembly may be required.




3000toys.com announces these models. Note that these are highly-detailed models. They feature an opening hood with authentic engine detail, accurately-detailed cab interior, poseable front wheels, pivoting fifth-wheel for trailer attachment, rolling wheels, working suspension, working landing gear, and a detailed chassis and undercarriage.



3000toys.com announces these models. Note that these are highly-detailed models. They feature an opening hood with authentic engine detail, accurately-detailed cab interior, poseable front wheels, pivoting fifth-wheel for trailer attachment, rolling wheels, working suspension, working landing gear, and a detailed chassis and undercarriage.




Recently discovered, this company, which was started in 2023, has well over 700 vehicles available in S-scale. They are based in College Place, Washington, and have a 3D-printer farm at their facility. The models are 3D-printed and sold as kits, requiring some assembly and final painting. The company's product line revolves mostly around war-time vehicles, but they also have non-war ones. Needless to say, there are way too many to list here, so if you are interested in vehicles spanning from WWI through to now, take a look at their web site.



3000toys.com announces these models. Note that these are highly-detailed models. They feature an opening hood with authentic engine detail, accurately-detailed cab interior, poseable front wheels, pivoting fifth-wheel for trailer attachment, rolling wheels, working suspension, working landing gear, and a detailed chassis and undercarriage.


3000toys.com announces these models. Note that these are highly-detailed models. They feature an opening hood with authentic engine detail, accurately-detailed cab interior, poseable front wheels, pivoting fifth-wheel for trailer attachment, rolling wheels, working suspension, working landing gear, and a detailed chassis and undercarriage.




3000toys.com announces these models. Note that these are highly-detailed models. They feature an opening hood with authentic engine detail, accurately-detailed cab interior, poseable front wheels, pivoting fifth-wheel for trailer attachment, rolling wheels, working suspension, working landing gear, and a detailed chassis and undercarriage.



3000toys.com announces these models. Note that these are highly-detailed models. They feature an opening hood with authentic engine detail, accurately-detailed cab interior, poseable front wheels, pivoting fifth-wheel for trailer attachment, rolling wheels, working suspension, working landing gear, and a detailed chassis and undercarriage.



New to this web site is a company called "3dRailroad", based in Wisconsin. They produce 3D-printed, unpainted, clear resin models in various scales, including a good amount of them in S-scale. The models require no assembly. They are budget-minded, so not necessarily museum-quality. In S-scale, they have 1920s-era and earlier cars and wagons, over a hundred 1950s cars and trucks, container-yard handling trucks, affordable figure sets (including Hollywood-inspired sets with cars), logging and heavy mining equipment models, and modern and WWII military tanks and trucks. Each order is custom printed, so allow one to three weeks before delivery. Please visit their web site, as they have too many models to list here.










The project was started by Jonathan Abbott, based in Raleigh, North Carolina. He used Kickstarter to help fund this project. He launched it in January of 2025 and the required funds were reached in 9 minutes! The fully animated, rechargeable, remote-controlled excavator was delivered in December 2025. Luckily for us, he chose 1:64 scale. He intends to manufacture more of these types of models. Based on his success, it sounds like they are sold out, but you can contact him or at least keep an eye on his web site to see if/when he starts another project. His web site has a video of the model in action.

Mike Fyten has created a 3D-printed kit for a concrete truck. Contact him via e-mail if you are interested in one or more of these unpainted kits.
Start an e-mail message (mike@kvrr-usa.com).


Sun Star Models was started in 1993 in Macau to produce diecast and plastic vehicle models. They have been making many larger-scale models, but are now producing 1:64 models. While their web site supports online purchases, U.S.-based dealers offer better prices, so search around. An example dealer is linked to for the Lincoln automobiles.


Be sure to see all, or other, products announced over the past year via the main News page.