Smoky Mountain Model Works Locomotive Trucks

Manufacturer:

Smoky Mountain Model Works (click for web site)

Manufacturer ID:

64-TK-10-SF

Category:

Locomotive Truck

Name:

AAR Type A

Model Introduced:

2016

Product Type:

Resin Kit

Finish:

unpainted

Prototype Dimensions:

8'0"

Notes:

Sideframes only, enough for two trucks (one engine). Modeler can use the S-scale NWSL Stanton Drive (as shown in the photo).

Manufacturer:

Smoky Mountain Model Works (click for web site)

Manufacturer ID:

64-TK-13-SF

Category:

Locomotive Truck

Name:

AAR Type B

Model Introduced:

2016

Product Type:

Resin Kit

Finish:

unpainted

Prototype Dimensions:

9'2"

Notes:

Sideframes only, enough for two trucks (one engine). Modeler can use the S-scale NWSL Stanton Drive (as shown in the photo). The Stanton truck has a maximum wheelbase of 9'0". The prototype truck is 9'4". The kit's sideframe is designed to 9'2" as a compromise. The 2" difference is imperceptible once painted black and assembled.

Manufacturer:

Smoky Mountain Model Works (click for web site)

Manufacturer ID:

64-TK-11-SF

Category:

Locomotive Truck

Name:

B

Prototype Manufacturer:

Blomberg

Model Introduced:

2018

Product Type:

3D-printed Plastic

Finish:

unpainted

Prototype Dimensions:

9'0"

Prototype Link:

visit site

Notes:

Sideframes only, enough for two trucks (one engine). Modeler can use the S-scale NWSL Stanton Drive (as shown in the diagram). These trucks were used on a large number of locomotives. With the add-on details of this kit you can accurately model early F through GP35 engines.

Manufacturer:

Smoky Mountain Model Works (click for web site)

Manufacturer ID:

64-TK-12-SF

Category:

Locomotive Truck

Name:

Blunt

Prototype Manufacturer:

American Locomotive Company (Alco)

Model Introduced:

2017

Product Type:

3D-printed Plastic

Finish:

unpainted

Prototype Dimensions:

8'0"

Prototype Link:

visit site

Notes:

Sideframes only, enough for two trucks (one engine). Modeler can use the S-scale NWSL Stanton Drive (as shown in the diagram). These trucks were used on Alco's S1 and S2 switcher locomotives.

Manufacturer:

Smoky Mountain Model Works (click for web site)

Manufacturer ID:

64-TK-FC

Category:

Locomotive Truck

Name:

Flexicoil C1L

Model Introduced:

2023

Product Type:

3D-printed Plastic

Finish:

unpainted

Prototype Dimensions:

8'0"

Notes:

Sideframes only, enough for two trucks (one engine). These are designed to be a replacement for the S-Helper Service AAR-based switcher locomotives' sideframes. It uses the same 4 screws that the SHS model has, so the swap is easy enough to do. These come with Hyatt roller bearing end caps. Some slight clean-up may be required.